No tracking number?
ASME Basic Calibration Block 1½" Carbon Steel Short Version
ASME Basic Calibration Block
1½" Carbon Steel
Used for establishment of primary reference responses for UT examination of
welds.
ASME Basic Calibration Blocks are intended to be
representative of actual components, and therefore do not have the smooth
scanning surfaces found on most general-purpose test blocks like the IIW or
DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to
create a rough surface texture that is more characteristic of real-world
inspection conditions.
Geometry: Block contains three side-drilled holes at 1.5" deep
minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½,
and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x
1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
·
Dimensions: 1½" thick x 6"
wide x 6" long
·
Material: Carbon Steel
Note: Customized
Material also available- Copper
Nickel, Titanium, Magnesium, Inconel, Hastelloy.
NdeTech was established in 2012 as NDT based company. Our portfolio spans across industrial services and manufacturing sectors. NdeTech was established as an NDT& NDE Reference Standards and flawed weld specimens manufacturing company, and NDT Training Certification, Recruitment Consultant for Inspection Industries provider to cater to the requirements of various industries in India as well as abroad..
NDE TECH INDIA - Our Business Communication Center
support@ndetech.org.in 
+91-63790008932024 NDETECH All Right Reserved.
+91-6379000893
support@ndetech.org.in
.jpg)
 Calibration Block (BS 2704).jpg)
 Calibration Blocks.jpg)
