ASME Basic Calibration 3" Block Carbon Steel-Ndt Reference Standards Block

ASME Basic Calibration 3" Block Carbon Steel

Price: $0.00

Part Number : NDETECH-7194
Availability : In Stock

Share with your Colleagues

Description

ASME Basic Calibration 3" Block Carbon Steel

Used for establishment of primary reference responses for UT examination of welds.
ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.

Geometry: Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

· Dimensions: 3" thick x 6¼" wide x 9"

· Material: Carbon Steel

Note: Customized Material also available- Copper Nickel, Titanium, Magnesium, Inconel, Hastelloy.

Products