MTU CALIBRATION BLOCK-Magnetic Particle Test Block-MPI

MTU Test Block

Price: $0.00

Part Number : NDETECH-7005
Availability : In Stock

Share with your Colleagues

Description

MPI MTU Calibration Block

Used to test the sensitivity of Wet Method MPI Baths.

Quick and easy verification and comparison of magnetic particle materials The MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials. This two-sided block has a variety of indications ranging in size from small to large.

Use the MTU-3 to compare:

• fresh and used materials

• different brands of materials

• different types of materials (visible, dual sensitivity and fluorescent, etc.)

Use the MTU-3 to verify:

• That aerosol cans are actually delivering particles MTU-3 Blocks are prepared in accordance with the EN ISO 9934 – 2: 2002.

• Natural cracks on both sides

• Can be used with fluorescent or visible particles

• Supplied with reference photograph Steel Disc - 50 mm in diameter by 11 mm thick, with a 10.5 mm hole through the center

Products

MTU Test Block

Price: $0.00

Share with your Colleagues

Description

MPI MTU Calibration Block

Used to test the sensitivity of Wet Method MPI Baths.

Quick and easy verification and comparison of magnetic particle materials The MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials. This two-sided block has a variety of indications ranging in size from small to large.

Use the MTU-3 to compare:

• fresh and used materials

• different brands of materials

• different types of materials (visible, dual sensitivity and fluorescent, etc.)

Use the MTU-3 to verify:

• That aerosol cans are actually delivering particles MTU-3 Blocks are prepared in accordance with the EN ISO 9934 – 2: 2002.

• Natural cracks on both sides

• Can be used with fluorescent or visible particles

• Supplied with reference photograph Steel Disc - 50 mm in diameter by 11 mm thick, with a 10.5 mm hole through the center

Quick Links

Contact Us

Products

MTU Test Block

Price: $0.00

Share with your Colleagues

Description

﻿MPI MTU Calibration Block

Used to test the sensitivity of Wet Method MPI Baths.

Quick and easy verification and comparison of magnetic particle materials The MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials. This two-sided block has a variety of indications ranging in size from small to large.

Use the MTU-3 to compare:

• fresh and used materials

• different brands of materials

• different types of materials (visible, dual sensitivity and fluorescent, etc.)

Use the MTU-3 to verify:

• That aerosol cans are actually delivering particles MTU-3 Blocks are prepared in accordance with the EN ISO 9934 – 2: 2002.

• Natural cracks on both sides

• Can be used with fluorescent or visible particles

• Supplied with reference photograph Steel Disc - 50 mm in diameter by 11 mm thick, with a 10.5 mm hole through the center

Related Products

Aluminum Test Block (for Sensitivity) Cracked aluminum block

ASTM test block is also known as MPT test bar used in Magnet

Ketos Ring The Ketos Ring is used to check overall performan

FLAT BOTTOM VACUUM BOX BUBBLE LEAK TESTING Vacuum box testi

Inside Corner Vacuum Box Bubble Leak Testing Vacuum box tes

Permanent Magnet Yokes Permanent Magnet Yoke No electrical

MTU Test Block Used to test the sensitivity of Wet Method MP

Yoke Weight lift test block (18.1kg) AC yokes 4.5Kg with Car

Mpi Weight Lift block (4.5kg) AC yokes 4.5Kg with Carrying H

MPT PIE GAUGE The pie gauge is a disk of highly permeable ma

These solid copper rods (copper type 110) provide circular m

These solid copper rods (copper type 110) provide circular m

These solid copper rods (copper type 110) provide circular m

central Conductor Kit, Includes one each of . Dia.5″ L 15

Copper Pad (5"x7") Used to prevent arc burn by helping to ma

Copper Pad Assembly (2 Copper Pads & V-Block) Double-Braided

Large Copper Pad (5″x10″) Used to prevent arc burn by he

Large Copper Pad Assembly 12" x 12" (2 Copper Pads & V-Block

Heavy Duty Lead Contact Plate. Copper impregnated lead conta

Lead Contact Plate. Duplicates original headstock/tailstock

Magnetic Flux Indicators Flexible indicators used to detect

QQI Standard KSC-430 Basic circular and crossed bar flaw co

NA-16 Notch Defect Test Bar the NA-16 Notch Test Bar complie

Stainless Steel Test Block (for washability) The stainles

Basic circular and crossed bar flaw configuration suitable f

QQI Miniature KSC-4-230 Similar to KSC230, except minia

QQI Variable Depth KSCT-234 Used for more quantitative wo

QQI Variable Depth KSC4-234 Used for more quantitative work

NiCr 10 micron panels (One Pair) NiCr Test Panels are ideal

NiCr 20 micron panels (One Pair) NiCr 20 micron panels (One

NiCr 30 micron panels (One Pair) NiCr Test Panels are ide

NiCr 50 micron panels (One Pair) NiCr Test Panels are ideal

Quote Request

Quick Links

Contact Us

MPI MTU Calibration Block