No tracking number?

Products

DAC GSET Eddy Current Standard Test Block (Duplex)

DAC GSET Eddy Current Standard Test Block (Duplex) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

DAC GSET Eddy Current Standard Test Block (Aluminum)

DAC GSET Eddy Current Standard Test Block (Aluminum) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

DAC GSET Eddy Current Standard Test Block (Carbon Steel)

DAC GSET Eddy Current Standard Test Block (Carbon Steel) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

DAC GSET Eddy Current Standard Test Block (Stainless Steel)

DAC GSET Eddy Current Standard Test Block (Stainless Steel) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

DAC GSET Eddy Current Standard Test Block (Titanium)

DAC GSET Eddy Current Standard Test Block (Titanium) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

DAC GSET Eddy Current Standard Test Block (Alloy)

DAC GSET Eddy Current Standard Test Block (Alloy) Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius Part No: AL.01 Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.