ASME Sec V Basic Calibration Block ½" Aluminum Short Version

ASME Sec V Basic Calibration Block ½" Aluminum Short Version

Price: $0.00

Part Number : NDETECH-7176
Availability : In Stock

Share with your Colleagues

Description

ASME Sec V Basic Calibration Block ½" Aluminum Short Version

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.

Used for establishment of primary reference responses for UT examination of welds.

Geometry: contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

Dimensions: ½" thick x 6¼" wide x 4" long.

Material: Aluminum

Note: Customized Material also available- Copper Nickel, Titanium, Magnesium, Inconel, Hastelloy.

Products