Products

API Crack Sizing Bars 0.375″ AND 1"- Carbon Steel                         

Set of 10 Bars

0.375″ T with Single V Groove

Bars will be 3″ W x 10″L

The crowns may be as welded or ground flush

Weld root will be as welded

Weld will be located in the center of 10″ bar

Each bar will contain a single surface connected “thumbnail”, “straight” or “asymmetrical” shaped crack — client choice

The crack ID surface length will span the 3″ width of the bar

The crack through wall depths

80%, 70%, 60%, 50%, 45%, 40%, 30%, 20%, 10%, 10% and 5%

Depths can be adjusted as needed

The asymmetrical-shaped cracks may have 2 specified depths

The crack locations will vary from HAZ, Centerline, Toe and Root as requested by client

(Customized Calibration Test Block and Flaw Specimen also available. Contact- support@ndetech.org.in)