Services We Offer

VACCUM BOX INSPECTION KIT

VACCUM BOX INSPECTION

Vacuum box testing is a non-destructive examination (NDE/NDT) used for locating welding leaks. A vacuum box and a compressor create a high or low-pressure vacuum and a detergent solution is applied to the test area. The detergent bubbles help to identify the leaks within the created pressure envelope. The main objective of the Vacuum box testing technique is to locate leaks in welds due to through-thickness discontinuities. This is accomplished by applying a solution to a weld and creating a differential pressure across the weld causing the formation of bubbles as leakage gas passes through the solution. This testing is to be performed prior to any main vessel or tank testing following the completion of all welding. 

8.1 Required Equipment for Vacuum Box Testing

•  Compressor.
• An air pipe between the compressor and vacuum box.
• A vacuum box, which enables it to obtain a depression of 500 m-bar, can be controlled by means of a vacuum manometer located on the box. The manometer shall have a range of 0 psi (0 m-bar) to 15 psi (1020 m-bar).
• A liquid detergent mixed with water makes soapy water.
• Bubble solution which produces a film. That does not break away from the area to be tested and the bubbles formed shall not break rapidly due to air drying or low face tension.
• Soups or detergents for cleaning shall not be used.
• General lighting or individual lighting if necessary. The minimum light level shall be 100-foot candles (1000 lux).