No tracking number?
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) ASME SA516 Gr 70 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) ASME SA517 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: ASME SA517. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) ASME SA36 / A36 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) STAINLESS STEEL 304 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) STAINLESS STEEL 316 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) TITANIUM 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: TITANIUM. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) ALUMINUM 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) COPPER 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: COPPER. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) INCONEL 625 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version) INCONEL 825 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" ( 0.030 X 0.030 CORNER NOTCH and 3 SURFACE NOTCHES 0.010", 0.020", 0.040" DEEP x 0.750" LONG) DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.687", 0.750", AND 1.0" Surface Notches: Qty 3 @ 0.010", 0.020", 0.040"deep x 0.750" long X 0.004" wide Hole Notch Configurations: 0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.
NDE FLAW TECH
support@ndeflawtechnologies.com 
+91-94451940012020 NDETECH All Right Reserved.
+91-9445194001
support@ndeflawtechnologies.com